Kangertech Dripbox kit instock about on 20th March Pay faster can get faster

Description

Kangertech Dripbox Starter Kit
Subdrip & Dripmod

Features and Specs:

Dimensions:
7ml Capacity
Utilizes 18650 battery
Replaceable Dripping Coil
Special Battery Cover Design
Bottom Feeder
60w
0.2ohm Minimum

Please note: Temperature control requires the use of nickel, titanium or stainless wire.

Warning:
Risk of battery Explosion! Ni 200 is designed for use only with devices equipped with circuit boards capable of controlling coil temperature, such as DNA 40 Mods. Do not use this product with any other devices.

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.


NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.

This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A or higher. Using other batteries can be potentially hazardous.

Warning: This tank uses sub-ohm resistance coils. This tank should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Please have a basic understanding of the batteries you are using and how to care for them properly.